Baby auto UNIT fix 012 Manual De Uso página 24

firmly against the vehicle seat (fig. 6.4). if necessary, adjust the
reclining of the vehicle´s seat backrest to ensure that the child
seat rests correctly.
8. Take the Top Tether and press the Top Tether adjuster to stretch
the strap.
9. Hook the safety clasp to the Top Tether anchor point
recommended in your vehicle instruction manual (fig. 6.5).
IMPORTANT! Make sure not to use the luggage clip
instead of the Top Tether anchor clip. Look for this
symbol in your vehicle:
10. To tighten the Top Tether, take up any slack by pulling the free
end of the belt through the Top Tether adjuster (fig. 6.5). The
Top Tether will be correctly tightened when the green tension
indicator extends 1 mm (fig. 6.7).
Uninstalling the Isofix arms
1. To release the iSoFiX arms, pull the button on the anchors to
unlock them until the indicator turns from green to red color.
This will release the child seat (fig. 6.8).
7. PlacING THe cHIld IN THe seaT. GroUP 1
To seat the child correctly follow the steps described in chapter 4.
8. reMoVING THe HarNess aNd saFeTy BUcKle
1. removing the 5 point harness and the safety buckle
1. Loosen the harness straps by pulling them gently while pressing
the harness adjustment button
2. Loosen the harness straps from the back of the seat, freeing
them from the harness connector (N). Repeat the operation
with the shoulder straps connector
3. Pull the harness straps from the front to free them from the
seat back. (fig.8.3).
24
(J)
(fig.8.1)
(P) (fig. 8.2).