Mic Level - JVCKENWOOD KD-R960BTS Manual De Instrucciones

BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
– For KD-R960BTS: All the buttons and display flash.
– For KD-AR865BTS / KD-R860BT: All the buttons flash.
– The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 16)
During a call:
– The buttons and display illuminate according to the settings made for [COLOR]. ( 23)
– If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate
Answer a call
Press
Reject a call
Press and hold
knob.
End a call
Press and hold
knob.
Adjust the phone volume Turn the volume knob during a call.
[00] to [50] (Default: [15]*) • This adjustment will not affect the
Switch between hands- Press the volume knob during a call.
free and private talk • Operations may vary according to the
modes
* Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.
or the volume knob.
or the volume
or the volume
volume of the other sources.
connected Bluetooth mobile phone.
On the remote control
Press .
Press and hold .
Press and hold .
—
—
Improve the voice quality
While talking on the phone....
1
Press and hold
2
Turn the volume knob to make a selection
(see the following table), then press the
knob.
3 2
Repeat step until the desired item is
selected or activated.
4
Press to exit.
To return to the previous setting item, press
.

MIC LEVEL

–10 — +10 (–4): The sensitivity of
the microphone increases as the number
increased.
NOISE RDCT –5 — +5 (0): Adjust the noise reduction
level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5 — +5 (0): Adjust the echo
cancellation delay time until the least
echo is being heard during a phone
conversation.
.
Default: XX
15
ENGLISH