Maintenance And Repair; Refueling; Routine Maintenance And Overhaul; Lubricants - Gram TCamel S SERIE Manual De Utilización

MAINTENANCE AND REPAIR

Refueling

Check oil every six months. Recommend using hydraulic oil: ISO VG32, at
400C its kinematic viscosity is 32 cSt, the total 0.3 liters.
Because of the transport or inversion, the air is likely to enter the hydraulic
pump, which will result in the fork not rising on the ascend position. The
following methods help exhaust. Move the handle from ascend position to
the descend position several times.

Routine maintenance and overhaul

Routine maintenance is essential .You should focus on wheels and mandrel
and timely remove the foreign body enwinding and pricking into the wheels.
When the removal has been completed, unload items on the fork, and
descend the fork to the lowest position.

Lubricants

In factories, all the bearings and axle have been applied the long life
lubricants; you just need to apply assemblies in a month of intermittent, or
each time a thorough overhaul.

Safety guide

1. Operating the truck, one should read the operation manual and the
attentions on the truck carefully.
2. Keep in mind that before pulling the truck, raise the fork slightly.
10