Output Plate; Cea Specifications - Orion COBALT CO500.1 Manual De Usuario

9 . Lo-Pass Crossover Frequency Control - adjusts the frequency of the crossover .
0 . Remote Bass Gain Jack - connects RGC-2 (remote bass control) .
 . Status LED - Will indicate any fault condition in amplifier, also lights briefly during
muting phase of turn-on .

Output Plate

Figure 2
Figura 2
Abbildung 2
Speaker Connections - accepts up to 2 AWG speaker wire .
 .
2 . 2 ATC Fuses - protects the amplifier from over current situations .
Power Connections - accepts up to 4 AWG power cables .
3 .
REM Remote Turn-on Input - turns on/off the amplifier when fed Switched 9 - 5
4 .
V+ .
Ground Connection - accepts up to 4 AWG ground cable .
5 .

CEA SPECIFICATIONS

CO500 .
CO800 .
4
1
1
Power Output: 75 Watts RMS x  at 4 ohms and < % THD+N
Signal to Noise Ratio: -80 dBA (reference  Watt into 4 ohms)
Additional Power: 250 Watts RMS x  at 2 ohms and < % THD+N
Power Output: 300 Watts RMS x  at 4 ohms and < % THD+N
Signal to Noise Ratio: -75 dBA (reference  Watt into 4 ohms)
Additional Power: 400 Watts RMS x  at 2 ohms and < % THD+N
2 2 3
2 3
© 2007 directed electronics—all rights reserved
4 5
4 5