Care & Maintenance; Error Codes; Troubleshooting - Danby FRESH DFG58D1BSS Manual Del Propietário

CARE & MAINTENANCE
CLEANING
Ensure the appliance is unplugged before cleaning.
• To clean the inside of the appliance, use a soft
cloth and a solution of a tablespoon of baking
soda to one quart of water or some mild
detergent.
• Clean the outside with a soft, damp cloth and
some mild detergent.
Note: Do not use cleaners containing ammonia or
alcohol on the appliance. Ammonia or alcohol can
damage the appearance of the appliance. Never
use any commercial or abrasive cleaners or sharp
objects on any part of the appliance.
VACATION
It is not advisable to leave the appliance running
during a vacation. Plants require daily watering
and monitoring to ensure they do not overheat or
dehydrate. Be sure to empty, turn off and unplug the
appliance before leaving for vacation.

TROUBLESHOOTING

Hours of operation:
Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time
Friday 8:30 am - 4:00 pm Eastern Standard Time
Information in this manual is subject to change without notice.
PROBLEM
No power
Alarm sounding and "HI" on the display
Alarm sounding and "LO" on the display
Danby Consumer Care: 1-800-263-2629
• A fuse may be blown or the circuit breaker tripped
• Plug not fully inserted into the wall outlet
• Internal temperature is higher than 32°C (90°F)
• Internal temperature is lower than 17°C (63°F)
10

ERROR CODES

The appliance may emit an alarm and display an
error code on the display screen. This is generally
due to temperatures inside the cabinet being too
high or too low. High temperatures can dehydrate
and burn plants. Low temperatures can freeze
plants and stunt growth.
Error Code "HI"
An alarm will sound and the error code "HI"
will appear on the display when the internal
temperature of the appliance is higher than 32°C
(90°F) for more than 10 minutes. If the temperature
inside the cabinet drops below 30°C (86°F) for
more than 5 minutes, the alarm and error will stop
and the appliance will resume normal functioning.
Press any key on the control panel to silence the
alarm.
Error Code "LO"
An alarm will sound and the error code "LO"
will appear on the display when the internal
temperature of the appliance is lower than 17°C
(63°F) for more than 10 minutes. If the temperature
inside the cabinet rises above 19°C (66°F) for more
than 5 minutes, the alarm and error will stop and
the appliance will resume normal functioning. Press
any key on the control panel to silence the alarm.
POSSIBLE CAUSE