DEFLECTA-SHIELD Delta III Instrucciones De Instalación página 4

Installation Steps
Install Square Head Bolts in tracks on bottom
of board, one in each track for each bracket.
Apply gasket to top of board.
7
Install Splash Guards with 3/8-16 x 1"
Thread Cutter Hex Head bolts. Install
End Caps with 1/4 -20 x 3/4" Black Bolt
flat washers, lock washers and nuts.
8
Set Board on Brackets, square head bolts
must go through slots in brackets.
9
Page 4 of 6
10395
Rev A