Installation; Preparing For Installation - Glacier bay F8FA0041CP Guía De Instalación Y Cuidado

Installation

1

Preparing for installation

CAUTION : Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply.
Clean off the installation surface.
Ensure the gasket is on the bottom of the
new faucet (A)
3
Installing the spray head
Screw the spray head (D) onto the spray hose (G).
A
2
Installing the spray Support
Insert the spray flange (E) through the installa-
tion hole on the sink.
Screw the sprayer mounting nut (F) onto the
spraer flange (E) shank from underneath the
sink,and hand tighen.Do not overtighten.
Attach the quick connector end of the hose (G)
to the faucet quick connect receiver.
4
G
E
F
D
G
E