Safety Devices On The Product; Safety Instructions For Maintenance - Husqvarna DURATIQ XP6 Manual Del Usuario

Safety devices on the product

WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Emergency stop button on the control panel
The emergency stop button is used to quickly stop the
engine. The emergency stop button breaks the mains
power supply.
CAUTION: Do not use the emergency stop
button on the control panel as the stop
button for the product.
To do a check of the emergency stop button on the
control panel
1. Turn the emergency stop button on the control panel
clockwise to make sure that the emergency stop
button is disengaged.
12
2. Start the engine. Refer to
control panel on page 19 .
3. Push the emergency stop button.
4. Turn the emergency stop button clockwise to
disengage.

Safety instructions for maintenance

• Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
• Do not use a product that is defective. Do the safety
checks, maintenance and the servicing as given in
this manual. All other maintenance work must be
done by an approved service agent.
• Installation and repair of the supply system for
propane must be done only by approved servicing
personnel for propane systems.
• Stop the product when you replace the diamond
tools. Push the ON/OFF button on the control panel
and push the emergency stop button.
• Do the inspection and/or maintenance with the
engine stopped.
• Do the maintenance to make sure that the product
operates correctly. Refer to
on page 24 .
To start the product with
Maintenance schedule
1268 - 002 - 25.05.2020