Operating; Protective Equipment; Basic Working Techniques - Husqvarna DM 220 Manual De Instrucciones

Protective equipment

General
Do not use the machine unless you are able to call for help in
the event of an accident.
Personal protective equipment
You must use approved personal protective equipment
whenever you use the machine. Personal protective
equipment cannot eliminate the risk of injury but it will reduce
the degree of injury if an accident does happen. Ask your
dealer for help in choosing the right equipment.
WARNING! The use of products such as
!
cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
WARNING! Long-term exposure to noise can
!
result in permanent hearing impairment. So
always use approved hearing protection.
Listen out for warning signals or shouts
when you are wearing hearing protection.
Always remove your hearing protection as
soon as the engine stops.
WARNING! There is always a risk of crush
!
injuries when working with products
containing moving parts. Wear protective
gloves to avoid body injuries.
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole.
Be careful as clothing, long hair, and jewellery can get caught
in moving parts.
Other protective equipment
WARNING! Sparks may appear and start a
!
fire when you work with the machine. Always
keep fire fighting equipment handy.
• Fire fighting equipment
• Always have a first aid kit nearby.

OPERATING

Basic working techniques

Level guiding system
The machine's Level guiding system works like an electronic
level and helps the user to drill in the required position. By
reading the LED indicator on the top of the machine and
adjust it accordingly, it makes drilling easier for the operator
and offers better precision.
The central green LED is lit as long as the machine is in the
required position.
The surrounding red LEDs indicate which direction the
machine must be angled to achieve the required position.
Activate the system
• Press the ON/OFF button to activate the system.
• This function senses how the machine is angled and
alters it accordingly.
– 11
English