Gardenline 49964 Manual Del Usuario página 6

Pergola
4
A
Place assembled Crossbeams (B) on top of two standing Poles (A).
Insert two Screw M6x65mm (4) through either end of assembled
Crossbeams (B) and into the tops of Poles (A).
Insert M6x15mm (2) through Support (J) and beneath assembled
Crossbeams (B). Insert second M6x15mm (2) through opposite end of
Support (J) and into Pole (A).
10
support@tdcusainc.com
Assembly Instructions
2
J
B
B
J
J
A
AFTER SALES SUPPORT
1800 599 8898
USA
USA
Pergola
2X
4
Insert cutout notch of assembled Crossbeams (C & D) into cutout
notch of Crossbeams (B), which is connected to Poles (A). With all
crossbeams sets connected, you will have a rectangular frame erected.
The Canopy Guide Bars (F) connected to Crossbeams (B) should be
facing outward. Insert two Screw M6x65mm (4) through either end of
assembled Crossbeams (C & D) and into the top of each Pole (A).
Insert M6x15mm (2) through Support (J) and beneath assembled
Crossbeams (C & D). Insert second M6x15mm (2) through opposite end
of Support (J) and into Pole (A).
AFTER SALES SUPPORT
1800 599 8898
USA
C
B
D
B
A
A
USA
Assembly Instructions
D
B
C
B
A
A
2
11
support@tdcusainc.com