Features; Assembly - RIDGID R3031 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Switch .........................................................Variable Speed
Stroke Length ........................................................... 1/2 in.
No Load Speed .................................0-3,500 r/min. (RPM)
kNOW YOUR RECIPROCATING SAW
See Figure 1, page 10.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BARREL-STYLE GRIP
The barrel-style grip of this saw is designed for one-handed
use only.
LED LIGHTS
The saw has built-in LED worklights that illuminate when
the switch trigger is depressed. This feature is convenient
when working in close or tight areas where additional light
is needed.

ASSEMBLY

UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
Input .................................. 120 V, AC only, 60 Hz, 6 Amps
Net Weight .............................................................. 4.4 lbs.
ORBITAL ACTION SELECTOR
Use the orbital action selector to select either a linear stroke
or orbital cutting action. A linear stroke is best for making
smooth cuts or when cutting metal while orbital action is
best for making a faster cut in wood.
TOOLLESS BLADE CLAMP
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade.
vARIABLE SPEED SWITCH TRIGGER
The variable speed switch delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
6 - English