TECshow ION 280F Manual De Usuario página 11

5. DMX connection and
DMX protocol
DMX addressing:
The device is controlled by universal DMX 512 protocol,
DMX address is the start channel used to receive instruc-
tions from the external controller. For independent con-
trol, each fixture must be assigned its unique address con-
trol channels. For example, this device has four channel
modes: 11/13, if we set the mode at standard 13 channels
mode, and there are several models need to be inde-
pendently controlled, we just simply address first fixture
at 1, and second fixture at 12, third one at 23, etc.
If the devices have the same address, they will behave syn-
chronically.
DMX addressing is limited, don't set the address so high
that without enough control channels for the fixtures.
Display is flashing when no DMX signal is received.
This device is equipped with 3-pins DMX in and out sockets only.
OUTPUT
Pin 1:GND
Pin 2: Signal (-)
Pin 3: Signal(+)
INPUT
P. 11
ION 280F
ENGLISH VERSION