SOLAC SW8240 Instrucciones De Uso página 24

Oiling the machine
Remove the face cover
- 1. Face cover screw
- 2. Face cover
- Apply a few drops of fine quality sewing machine oil to the point indi-
cated by the arrows in the figures. For machine in constant use, oil two
or three times a year.
- In case the machine does not work smoothly due to standing idle for
some time, apply a few drops of kerosene at the oiling point, and turn
the machine rapidly for a minute.
- Before oiling, wipe off oiling points.
Supplies
- Supplies can be acquired from distributors and authorised establish-
ments (such as filters, etc.) for your appliance model.
- Only the following type of supplies must be used with the appliance.
- Lamp type: E14, Max: 15 W
- These supplies are available in specialist shops.
Anomalies and repair
- In case of breakdown call the customer service telephone number
indicated in the guarantee sheet. Do not attempt to disassemble or
repair the appliance yourself as this may be dangerous.
For EU product versions and/or in case that it is requested in your
country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are
included in a collection, classification and recycling system. Should
you wish to dispose of them, use the appropriate public recycling bins
for each type of material.
- The product does not contain concentrations of substances that could
be considered harmful to the environment.
This symbol means that in case you wish to dispose of the
product once its working life has ended, take it to an authorised
waste agent for the selective collection of Waste from Electric
and Electronic Equipment (WEEE).
This appliance complies with Directive 2014/35/EU on Low Voltage, Di-
rective 2014/30/EU on Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain hazardous substances in
electrical and electronic equipment and Directive 2009/125/EC on the
ecodesign requirements for energy-related products.