Troubleshooting; Specifications - Mi-T-M MV-900-0MEV Manual De Uso

SYMPTOM
Wet/Dry Vac will not start.
Inadequate suction.
No suction.
tecHnical data
motor
Hp
cfm
waterlift (inches)
capacity (gallons)
water recoVery (gallons)
electrical cord
dimensions (l x w x H / inches)
weigHt
0

troublesHooting

PROBABLE CAUSE
Power Cord is disconnected.
Circuit overload.
Brushes on motor are worn.
Flexible Hose is obstructed, cut or
damaged.
Wand or attachment is obstructed.
Wet/Dry Filter is full of dirt.
Canister is full.

specifications

REMEDY
Ensure Power Cord is securely
connected to the unit and to the
power source. If using an
extension cord, ensure the power
cord and extension cord are
securely connected.
Check breaker or fuse panel.
Contact your Customer Service.
Clean or replace Flexible Hose.
Clear obstruction.
Clean or replace.
Empty Canister.
model no. mV-900-0meV
20V 2-Stage By-pass
.3 Nominal HP
0
87
9
6.0
25'
4 x 4 x 22
25
Wet/Dry Vac Operator's Manual