Charging The Battery - Jetson BOLT Manual De Uso

CHARGING THE BATTERY

Your Bolt comes with a built-in rechargeable lithium ion battery. Always
use the provided charger only. Please remember to cover the Charging
Port when you are done charging. Before your first ride you must fully
charge the Bolt - charge for 6 hours for the first 3 times you use it.
For every ride after, charge your Bolt until it is fully charged, and NOT
LONGER. Do not leave any chargers plugged in overnight, or leave it
plugged in past the charge time.
1. Plug one end of the power cord into a grounded AC outlet and
the other into the Bolt's Charging Port. The red charging light on the
charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the Bolt
after each use.
(Please note: Always plug the charger into the wall first before the
device. If the wall outlet doesn't have power and you plug the charger
into the device first, it will light green, even if the battery is not full. So
always plug into the wall first to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Don't use the Bolt if the battery emits strange odors, overheats, or
begins leaking. If the battery does leak, do not touch any leaking
materials, as the battery contains dangerous substances. Do not open
the battery and do not insert anything into the battery.
Do not charge the battery if it has over-discharged. It should be
discarded for your safety. Do not turn on the Bolt while it is charging.
10