Menu Operations - Nevir NVR-7017 TTCU Manual De Instrucciones

2.Menu Operations

Once the channel scan is finished and all the channels are stored into the database, you can
start to watch the digital terrestrial TV channel or listen to the radio broadcast, some typical
operations are given in this chapter.
2.1 Main Menu
Main Menu for operating a lot of functions.
(1) Press <Menu> button to enter Main Menu. See Figure 1.
(2) Press <Info> button to display the version information of STB.
2.2 SETUP
Set the system settings of STB. See Figure 1.
2.2.1 Installation
Set the receiving and playing program settings of STB. See Figure 2.
2.2.1.1 Antenna Setting
Set the antenna power on or off to supply +5V power to antenna or not.
Note: The default is OFF, set this option to ON only if this STB is connected to an active
antenna which amplifies the received RF signal, otherwise please set it to OFF
2.2.1.2 Country Setting
Set the country for Auto Scan, Manual Scan and Time Zone.
Note: Change the Country Setting will automatically change the default Time Zone and set
the default Frequency and Bandwidth for Auto Scan.
2.2.1.3 OSD Language
Set the On Screen Display Language.
2.2.1.4 Audio Language
Set the audio language for watching program.
2.2.1.5 Subtitle Language
Set the language for displaying subtitle.
2.2.1.6 LCN
Set the Logical Channel Number to on or off.
Note: LCN is a number that uniquely identifies a logical channel, which is popular in some
european countries such as England, France.
2.2.1.7 Auto Time Zone / Time Zone
Allow you to enable or disable auto time zone offset update. If you know the GMT
(Greenwich Mean Time) time zone offset of your location,set the Auto Time Zone to OFF and
select an appropriate Time Zone, otherwise set it to ON and let the system update the time
zone automatically according to the transport stream. See Figure 3.
Note: Some Countries are covered with more than one Time Zone.
2.2.1.8 Auto Scan
Press <OK> button to start Auto Scan. See section 1.2.1 for details.
2.2.1.9 Manual Scan
Press <GREEN> button to start Manual Scan. See section 1.2.2 for details.
" "
6
" ".