Switching Modes - 1byone 713UK-0001 Manual De Instrucciones

ed for long periods of time, unless specified in this manual
EN
that the used function has a standby mode or is designed for
unattended operation.
DE
7) Electrostatic may cause the DAB Radio to malfunction and
FR require a reset.
Power Supply
ES
Inserting the batteries:
IT
Open the battery compartment on the rear of the radio and
insert four AA (UM3) batteries as shown on the markings in the
battery compartment. The radio will be ready for use once the
battery compartment is closed.
Connecting to wall power:
The power adapter is not included but can be purchased
additionally.
For UK
SKU: 104UK-0002
Input: AC100-240V, 50-60Hz
Output: 5V 0.5A
Connect the power adaptor to the DC-IN jack. When connect-
ed, power will not be drawn from the batteries.
For EU
SKU: 104EU-0002
Input: AC100-240V, 50-60Hz
Output: 5V 0.5A
AC Adapter' Plug (not included)
- 03 -
Switching DAB Radio On/O
• To switch the DAB Radio, press the On/Standby button. The
LCD will turn on.
• To switch the radio to standby mode, press the On/Standby
button. The LCD will only display the clock with no backlight.
• To switch the radio off when using battery power, press and
hold the On/Standby button. The LCD will completely turn off.
It is highly recommended to switch off the radio in order to
save power when using the batteries as the main power
source.
Adjusting the Antenna/Aerial
The antenna/aerial should be extended to ensure good
reception in both DAB and FM radio modes. It may be
necessary to alter the position of the radio and/or antenna to
achieve the best signal.

Switching Modes

After turning on your DAB Radio, press the Mode button to
switch modes.
Using the Volume Button
After turning on your DAB Radio, use the VOL-/VOL+ buttons to
increase or decrease the volume.
- 04 -
EN
DE
FR
AC Adapter' Plug (not included)
ES
IT