Installations - FTE Maximal MODIG HD Manual Del Usuario

Installations

RISK of damage to the unit
Mechanically handling the unit may result in damage. Do not connect the unit to the power supply
before or during assembly. Connect the unit as below instructed
NO HOT PLUG AND CONNECT THE CABLE AS FOLLOWING STEPS.
1. Mount and tighten the screws and
plugs to secure the unit to the wall.
Left 10 cm of free space around from
each unit.
2. Connect the signal input in
the respective connectors.
The signal source can be
from a surveillance monitor,
DVD, set-top box, CCTV and
etc.
3. Optionally, connect the loop-
through RF input coaxial
cable.
4. Connect cable to
output to STB/TV.
5. Power supply connection:
a) Connect the earth cable;
b) Connect the power plug to the unit mains connector;
c) Connect the power plug to the mains socket.
Technical changes and mistakes reserve
User manual – MODIG HD
RF
.
1
4
MODIG HD Version en_1.4 Fte maximal