Publicidad
Instruction Leaflet IL040018EN
Effective May 2018
Step 5
Attach the IP54/Type 12 A-cover (without side opening) to the
die-cast case with four M4x40 screws.
Step 6
Press the two snaps on the fan bracket to remove the fan module
from the chassis, but keep the fan cable connected.
EATON
4
www.eaton.com
Step 7
Remove the waterproof plate from the die-cast case.
Step 8
Insert the seal plugs (FR1: 2 pcs, FR2: 3 pcs) into the venting holes on
the die-cast case.
IP54/Type 12 Kit
Publicidad
