General Safety Instructions For Power Tools; Safety Instructions For Miter Saw Stands - Bora Portamate PM-3900B Manual Del Operador

General Safety Instructions for Power Tools

Using power tools of any kind can be dangerous if safe operating procedures are not followed. Recognizing the
hazards of each tool and using them with respect and caution will considerably limit the possibility of personal
injury. However, if safety precautions are ignored, personal injury will likely result. Always use common sense – your
personal safety-is your responsibility. Know your power tool. Read and understand the Operator's Manual and
observe the warnings and instruction labels affixed to the tool.

Safety Instructions for Miter Saw Stands

1. Use caution when folding or unfolding legs to limit any finger pinch points.
2. Place stand on flat and level surface to keep tool from rocking or tipping.
3. Make certain that work support extensions are within safe operating limits, and are properly locked in place before
using tool. Do not exceed 300 lbs. on main frame table.
4. Test the setup for stability before proceeding with work.
5. Be sure the miter saw is tightened securely at all mountings before use.
Hardware & Parts
Note: Hardware and parts shown are actual size.
Tools required (not included): Adjustable wrench, 1/4" Socket, 5/16" socket
K
R
G
L
3
N
M
I
H
J