Changing Your Snooper Dvr-1Hd's Hardware Settings - Snooper DVR-1HD Mini Manual Del Usuario

Changing your Snooper DVR-1HD's hardware settings

The settings in your DVR-1HD have been set for optimum use but are
user selectable and can be changed by connecting the device to an
appropriate monitor using the video cable provided. You can also connect
the unit to any Snooper PND but may need to purchase an adaptor cable
separately from www.snooper.co.uk
1. Ensure that the DVR-1HD internal battery is fully charged and the SD
card is inserted.
2. Connect the USB to Video cable provided, between your DVR1HD and
a suitable monitor.
3. Power on the DVR1HD. You should see what the DVR1HD camera is
looking at on the monitor.
4. Press the >|M button to enter the Menu.
5. Scroll up and down through the menu using the MIC and SOS button
and use to the REC button to Enter or Confirm a setting.
6. To exit the menu or 'go back' press the >|M button.
UK • 19