Zehnder 40019309 Manual De Instrucciones página 33

ECO MODE (continued)
A) Linked Eco operation
desired temperature level for the Comfort setting.
boost
mode mode mode mode mode mode mode mode mode mode mode mode mode mode mode mode mode mode mode
B) Unlinked Eco operation
chapter 5.3 parameter 2). You can then choose the room temperature when the appliance is
running in Eco mode.
boost
mode mode
set for Comfort mode (e.g.: your Eco temperature cannot be higher than 18°C if your Comfort
temperature is set at 19°C).
60
boost
mode
The user cannot change this temperature set-
ting. It cannot be higher than 19°C or lower
than 7°C.
boost
mode
7 to
19°C
15.5°C.
COMFORT MODE
(recommended if the room is occupied)
The LED on your receiver unit is on, showing red.
PROGRAMMES P1 AND P2
(Pre-set programmes)
Your appliance's remote control includes two daily programmes, P1 and P2. These are based
on various room usage scenarios (your appliance changes from Comfort mode to Eco mode,
depending on the time).
The LED on your receiver unit will light up with the colour corresponding to the current operating
mode (see chapter 4.2).
P1
P2
midday).
NOTE:
You can also customise the operation of these programmes P1 and P2 yourself (see
chapter 7).
40019121 02/2019
boost
mode
Default content for
programme P1
Default content for
programme P2
61