Technical Specifications; Disposal Of Old Electrical Appliances; Technical Support Service And Warranty - cecotec CONGA 5090 Manual De Instrucciones

FRANÇAIS
The robot could not connect to Wi-Fi.
The robot did not carry out the scheduled
cleaning.
The robot does not return to the charging
base after spot cleaning or after changing
starting position.
The robot does not resume cleaning.
The robot is always offline.
Connection between the mobile phone
and the robot failed.
44
The Wi-Fi signal is poor. Make sure the Wi-Fi
signal is correct.
The Wi-Fi connection is unstable. Reset the
router, check if there are any App updates and
try again.
Check if the robot is in Night mode and switch
mode. The robot does not carry out scheduled
cleaning cycles under this mode.
Make sure the robot is connected to the
network, it will not be able to carry out
scheduled cleaning tasks without being
connected.
The robot will map and calculate a new route
after operating under spot cleaning or after
having changed its starting position.
If the charging base is very far away from
the robot, it will not be able to charge back
automatically. Put the robot back on the
charging base manually.
Make sure the robot is not in Sleep mode, it
will not resume cleaning under this mode.
It won't resume cleaning when it is placed
manually on the charging base.
Make sure the robot is successfully connected
to the network and always in the range
covered by the Wi-Fi signal.
Make sure the robot and the charging base
are in an area with good Wi-Fi signal, reset
the router and try connecting them again.

10. TECHNICAL SPECIFICATIONS

Product reference: 05424
Product: Conga 5090
100-240 V~ 50/60 Hz
Battery: 14,8 DC, 6400 mAh
Frequency bands: 2.412-2.472 GHz 5.150-5.250
5.250-5.350 GHz 5.470-5.725 GHz Maximum Transmission Power: 16 dBm
Made in China | Designed in Spain

11. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.

12. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec Technical Support Service at +34 963 210 728.
FRANÇAIS
45