approved
•
by an expert before taking the device into
operation for the first time.
•
These installations have to be approved by a
skilled person once a year.
•
Overhead mounting requires extensive experi-
5. RIGGING & DISPLAY
Mounting Bracket
Handing Bracket
Display
1. (MENU)
2. (UP)
3. (DOWN)
4. (ENTER)
5. Display
ence, including others calculating working load
limits, installation material being used, and
periodic safety inspection of all installation ma-
terial and the device. If you lack these qualifica-
tions, do not attempt the installation yourself.
Improper installation can result in bodily injury.
Safety Rope
Rapid locking hook
Insert the quick-lock fasteners of the
first holder into the respective holes
on the bottom of the device.Tighten
the quick-lock fasteners fully clock-
wise.
Make the finished installed mounting
bracket tighten on the fixed bracket.
Pull the safety rope through the holes
on the bottom of the base and over
the trussing system or other safe
fixation spot.
Note: This step is quite important to
ensure that fixture will not drop out
by the damage of clamp.
1. DMX in
2. DMX Out
3. ON/OFF
4. Fuse
5. Power
socket
English version
P. 7
| Tecshow Saturn