weasy TRC50 Manual De Usuario página 10

INSTALLATION GUIDE
Installing Dusting Paper and Holder:
1. Remove the dusting paper holder following the instruction shown in Fig. 4.
2. Flat the dusting paper and put it on the floor or table. Then place the holder (the
side with 4 stoppers face up) on the paper at the midpoint as shown in Fig. 5.
3. Remove 4 stoppers from the holder, fold the hem of dusting paper on two sides back
to the holder, and place back 4 stoppers on top of the paper then press firmly to fix
the paper onto holder (Fig. 6).
4. Aim the 2 bolts of the dusting paper holder at the 2 holes (inside the 2 big wheels)
and click the holder on the bottom of the cleaner. (Fig. 7)
NOTE:
1. Do not use mopping function on the carpet. At the same time you should remove
the side brushes to prevent it from damaging the brushes.
2. If you don't need to use mopping function, please remove the dusting paper holder
from the cleaner (follow the instructions shown in Fig. 4) before you turn it on for
cleaning.
Lift up
2
Fig. 4
Stoppers
Dusting Paper
Fig. 5
Push to
the left
Hole for the
stopper
Press the two bolts on
the dusting paper holder
into the two holes on
the bottom of the
cleaner.
Fold back
Fold back
Press
Finished !
Fig. 6
Fig. 7