Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Mowin_
22-
--
,;,',
SWEEPING
- Thefanning
action
of therotat-
ing line can
be used
for a quick
and
easy
clean
up. Keep the line parallel
to and above
the surfaces
being
swept
and move
the tool
from side
to side.
Swe
._ii
,II_WARNING:
Disconnect
the
spark
plug before
performk/g
maintenance
except
for carburetor
adjustments.
CHECK
FOR
LOOSE
FASTENERS
AND
PARTS
• Spark
Plug Soot
• Air Filter
• Housing Screws
• Assist
Handle Screw
• Debris Shield
CHECK
FOR
DAMAGED
OR
WORN
PARTS
Contact
an authorized
service dealer
for re-
placement
of damaged
or worn parts.
• ON/OFF
Switch
- Ensure ON/OFF
switch
functions
properly
by moving the switch to
the OFF position.
Make sure engine stops;
then restart engine and continue.
• Fuel Tank - Discontinue
use of unit if fuel
tank shows signs of damage
or leaks.
• Debris Shield
- Disconfinue
use of unit if
debris
shield is damaged.
INSPECT
AND
CLEAN
UNIT
AND
LABELS
• After
each use,
inspect
complete
unit for
loose or damaged
parts. Clean the unit and
labels using a damp cloth with a mild deter-
gent.
• Wipe off unit with a clean dry cloth.
CLEAN
AIR
FILTER
A dirty air filter decreases
engine
perform-
ance and increases
fuel
consumption
and
harmful emissions.
Always
clean after every
5 hours of operation.
1.
Clean the cover and the area around it to
keep dirt from falling
into the carburetor
chamber
when the cover is removed.
2.
Remove
parts as illustrated.
NOTE:
Do not clean filter in gasoline orother
flammable
solvent to avoid creating a fire haz-
ard or producing
harmful
evaporative
emis-
sions.
3.
Wash the filter in soap and water.
4.
Allow filter to dry.
5.
Add a fewdrops
of oil tothe filter; squeeze
the filter to distribute
oil.
6.
Replace parts.
_Filter
_
Screws
Cover
REPLACE
SPARK
PLUG
Replace
the spark
plug each year to ensure
the engine starts easier
and runs better. Set
spark plug gap at 0,6 mm.
Ignition timing
is
fixed and nonadjustable.
1.
Twist, then pull off spark
plug boot.
2.
Remove
spark plug from cylinder
and dis-
card.
3.
Replace
with
Champion
RCJ-6Y
spark
plug and fighten
securely
with a 19 mm
socket wrench.
4.
Reinstall
the spark plug boot.
Publicidad
Tabla de contenido
