Fagor IO-MWS-0473 Manual De Instrucciones página 70

INSTALL THE OVEN
1. Fix ADJSUTSCREW A on the UPPER AIR TUNNEL of the oven, and then install
the oven into the cabinet.
• Adjust the height of ADJUST SCREW A to keep 1mm gap between the AD-
JUST SCREW A and the top plane of cabinet.
• Do not trap or kink the power cord.
• Make sure that the oven is installed in the center of the cabinet.
2. Open the door; fix the oven to the cabinet with SCREW B at the INSTALLATION
HOLE of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER to the INSTALLATION
HOLE.
A - ADJUST SCREW A
B - UPPER AIR TUNNEL
C - TRIM-KIT
D - ADJUST HEIGHT
E - ADJUST SCREW A
F - TRIM KIT
G - SCREW B
H - INSTALLATION HOLE
I - TRIM-KIT PLASTIC COVER
70