Controls And Displays; Explanation Of Warning Symbols And Notes; Getting Started; Package Contents - Hama CHAT, POWER & GRIP Instrucciones De Uso

G Operating instruction

Controls and Displays

1. Headset
2. Mute switch
3. Volume control
4. 3.5 mm connector
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference.

1. Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2.

Package Contents

• Mono headset
• Grip cover (protective silicone cover)
• 4x analogue stick caps
• Controller charging cable
• Operating instructions

3. Safety Notes

• The product is intended for private, non-commercial use
only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Do not drop the product and do not expose it to any
major shocks.
• As with all electrical devices, this device should be kept
out of the reach of children.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not modify the device in any way. Doing so voids the
warranty.
6
Warning
Always keep the volume at a reasonable level. Loud
volumes, even over short periods, can cause hearing
loss.
4.1

Getting Started

• Turn down the volume of your headset using the volume
control (3) integrated into the cable control.
• Turn off the microphone's mute function.
• Only now should you connect the 3.5 mm connector
(4) on the headset to the 3.5 mm port on your PS4
controller.
• Adjust the volume of your headset as desired.
• You can optionally slide the mute switch (2) on the cable
control to 'Mute' to turn on the mute.
• You can optionally slide the mute switch (2) back to 'On'
to switch on the microphone again later.
4.2 Microphone Test on the PS4 Controller
• The mute switch mutes the microphone on the headset,
but not the speakers.
• Ensure that you deactivate the mute function before
connecting the headset to your controller using the
3.5 mm jack plug. Otherwise, the headset will only be
recognised as headphones (chat not possible) until the
next time you connect it to your controller.
• The game sound can, in addition to the chat sound, be
output directly on the headset. Change this setting in the
PS4 menu under the following path:
• Settings / Sound and Screen / Audio Output Settings /
Output to Headphones
• You can perform a detailed function test of the headset
via the following path and using the functions in the
main PS4 menu:
• Messages / Create Message / Select contact from the
friends list / Press O once to jump to the Attachments
field / Record Voice Message
• You can test the microphone and the sound function
by recording and playing back a voice message. If the
display indicates that the microphone is not connected,
observe the instructions in 6: Troubleshooting.