Publicidad
Idiomas disponibles
Idiomas disponibles
English
1. Loosen the screws to remove the back plate from the front cover and
use it as template to mark the two holes to be drilled.
2. Drill the holes and insert the wall bushings.
3. Attach the back plate to the drill holes with the matching screws, and
then reassemble the removed front cover.
How to use
Be sure that the air inlet and outlet are not obstructed.
1. Switch on general power and pick up the dryer body, the dryer will
work when the spring button is held on.
2. Point the appliance to aim the airflow towards the desired area.
3. After using the dryer, replace it on dryer body.
Cleaning and Maintenance
– Before cleaning always unplug the hairdryer from the mains supply.
– You can clean your appliance with a cloth dampened with water.
– Do not immerse the appliance in water or in other liquids!
– The hairdryer should be protected from dust. When necessary, clean the
air inlet and outlet grills using a soft brush.
ATTENTION: The cleaning of hairdryers with detergents, solvents, alcohol and
other chemical products is strictly prohibited.
Technical Specifications
Model: ......................... HD-120.006A
Power supply: .............. 220-240V~ 50/60Hz
Power consume: .......... 1000-1200 W (DC motor)
Protection class: .......... II
4
Publicidad
