Package Contents - i-tec C31DUALDOCKPD Manual De Instrucciones

EN
Notice:
For Apple users: This docking station has the MST function (2
monitors in extended mode), which is not supported by the operating
system masOS currently. However, the second external monitor can
be connected using i-tec USB 3.0 graphics adapter.
For Windows users: MST technology in the Windows OS allows
connecting two monitors simultaneously - in the advanced mode
(different content on connected monitors) and in the mirroring mode
(same content on connected monitors). To set up two monitors,
setting of the MST mode in some hardware combinations requires
using of both the Windows control utility and the control panel for the
Intel HD Graphics. Another external monitor can be connected using
i-tec USB 3.0 graphics adapter.
USB Power Delivery (USB PD) – USB-C connector optional feature.
The connector with this support can both charge and be recharged
and supports loads up to 60W (according to the profiles 4). For
Windows 10 USB Power Delivery can not be applied to the earlier USB
3.0/2.0 A, B and micro B ports.

PACKAGE CONTENTS

• i-tec USB-C MST docking station
• USB-C cable (100 cm)
• Power adapter (output: DC 20V/5A, max.100W, DC cable 200 cm +
network cable 200 cm)
• Quick Start
DOCKING STATION DESCRIPTION/SPECIFICATION
Front panel:
1. 1x USB-A 3.0 port (data transfer rate up to 5 Gbps ) with fast
charging according to spec. BC 1.2 – for connecting and rapid
charging of USB devices
2. 1x USB-C 3.1 (Gen. 1) port – for connecting of USB-C devices
and data transfer
3. 1x Audio 3.5 mm Jack – for headphones 2.1
4. ON / OFF switch – for the docking station switching on/off
6
Quick Start / USB-C Dual Display MST Docking Station