Clean The Shuttle Assembly - IKEA SY Manual De Instrucciones

ENGLISH

Clean the shuttle assembly

Dismantle the shuttle assembly
1. Move the needle to its highest position, remove the accessories compart-
ment and open the cover.*
2. Remove the bobbin case by releasing the little latch and pulling the bob-
bin case out.
3. Push the shuttle race levers aside. Lift out the retaining ring and the shut-
tle by pulling the pin in the centre of the shuttle.
4. Use the brush to remove dust and threads from the parts.
* WARNING! Always unplug the sewing machine from the wall socket before
you leave it or before you replace machine parts.
26
Bobbin
Shuttle
Lever
Bobbin case
Retaining ring
Shuttle
driver
Lever