OXYHYDROGEN TECHNOLOGIES OXYHTECH MAXI PLUS Manual De Uso página 6

VERY IMPORTANT:
The objective is to introduce the oxyhydrogen gas into the combustion chamber, making
sure that wherever we place the tube there is aspiration and that there are no leaks. We
recommend introducing it directly through the air filter, inserting the tube inwards a few
centimeters.
ATTACH THE TUBE WITH A CLAMP OR ADHESIVE TAPE, SO THAT THE TUBE IS NOT
SUCTIONED IN CASE OF POWERFUL SUCTION TURBES.
4) Turn on the machine switch. (On-Off)
5) Follow the instructions on the touch screen.
IMPORTANT
IN CASE THE ENGINE THAT IS BEING DECARBONIZED STOPS DURING
DECARBONIZATION (DUE TO ANY TECHNICAL FAILURE THE MACHINE DOES NOT STOP),
DO NOT START THE ENGINE WITHOUT BEFORE PROCEEDING AS FOLLOWS:
A- OPEN AND REMOVE AIR FILTERS AND ANY EASY TUBE REMOVED SO THAT THE GAS
IS EVACUATED FROM THE DUCTS.
B- BLOW COMPRESSED AIR IN THE MOTOR PIPES.
C- START THE VEHICLE ENGINE BLOWING DURING STARTING WITH THE COMPRESSED
AIR HOSE.
IF THIS HAPPENS, PLEASE NOTIFY THE TECHNICAL SERVICE BY EMAIL:
techservice@oxyhtech.com OR BY PHONE NUMBER: +34 948 597 449 / +34 622 592
388