Updating Speed Trap Data - Snooper DVR-4HD Manual Del Usuario

8

Updating speed trap data

Updating the speed trap data is simple.
1. Register your DVR4-HD at
instructions.
For subsequent downloads please follow the instructions below:
1. Log in to http://www.snooperneo.co.uk/dvr4.cfm
2. Select the speed trap data you wish to download by clicking the link, when prompted save the file to
your PC
3. Remove MicroSD from the DVR-4HD and insert into your PC.
4. Please unzip the firmware of "sp16gw_v3.00.25_r2722.rar" and put "SP16GW.BRN" into the MicroSD card.
Insert the updated MicroSD card into the DVR-4HD
5. Power on the DVR-4HD to update.
The process has completed once the progress bar reaches 100%
5. Remove the MicroSD card from the DVR-4HD.
6. Please delete the file of SP16GW.BRN from the MicroSD card, and then put 3 files of "startlogo_cus.jpg" +
"umdefest.inf" + "um_update_info.text" into a MicroSD card for updating again.
7. Please remove the 3 files again from the MicroSD card.
8. After the file has been deleted return the MicroSD card to the DVR.
All other marks, products or company names mentioned in this guide are trademarks of their respective companies.
http://www.snooperneo.co.uk
and enter you serial number.
Copyright © 2015
All rights reserved.
EN • 38
once registered , follow the on screen
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015