Safety Instructions; Frequently Asked Questions - i-tec TB3DUAL4KDP Manual De Instrucciones

Once connected, the drivers will be installed automatically from the system.
NOTICE!
Before installing, make sure that the latest drivers and updated BIOS are
installed on your system.
CONNECTING A DISPLAY PORT MONITOR
The adapter is equipped with 2x 4K@60Hz Display Port for connecting one
or two external monitors or a projector with Display Port interface. Advanced
plasma and LCD monitors and TVs can be used as an imaging equipment.
Graphics chip that is „ the heart" of the adapter supports up to 5K (Ultra HD)
resolution 5120x2880@60Hz when using only one monitor (connected with
two DP cables). Use only high-quality Display Port cables for connecting the
monitor to the adapter. During the additional monitor installation, the screen
of the laptop Mac, tablet or PC can flicker, but this is normal.
Most problems with the adapter and connected devices can be solved by
disconnecting the adapter's Thunderbolt™ 3 cable from the Thunderbolt™ 3 port
on PC, Mac, smartphone or tablet and reconnecting it after approximately 10 s.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and
falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user
manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
Quick Start
ENGLISH | 5