Dab Radio; Dab Radio Station Playing; Storing A Dab Station In A Preset; Playing A Preset Dab Station - Rotel RT-11 Manual De Instrucciones

Ocultar thumbs Ver también para RT-11:

Manual de instrucciones (13 páginas)

Tabla de contenido

Idiomas disponibles

DAB RADIO

Make sure that your local area can receive Digital Audio Broadcast (DAB)

broadcasting signal.

Press the DAB

button on the front of the panel, or remote

DAB channels are categorized into ensembles, which are also known as

multiplexes. Each multiplex provides a number of stations and each service

contains a primary service that can contain secondary services. DAB

technology allows broadcasters to transmit additional data along with the

audio, which can include other audio channels, text and even images and

computer data in the future.

DAB Radio Station Playing

1. Select DAB

Button from the front panel and the unit will scan for

available stations. After scanning you will see the following menu.

> BBC 1

BBC 2

2. Press the ENTER

button on the front panel or the ENT

remote control to select the station and start play.

Storing a DAB station in a preset

While a DAB station is playing, push the memory button

the number of preset assigned from numeric pad

DAB radio stations may be stored.

Playing a preset DAB station

When a DAB station is playing, you can switch to a preset station in one

of the following ways.

1. From the numeric pad

, press the preset number of the desired station.

2. Press PRESET +/-

buttons on the remote to call out preset numbers

and corresponding station. Press the up/down

+/-

buttons on the remote control or turn the knob

to choose the desired station, then press ENTER

or the ENT

key on the remote control.

DAB Settings Menu

Press the DAB

on the front panel or remote

settings Menu. Turn the knob on the front panel or use the up/down arrow

keys on the remote control to go through each sub-menu.

• Station List: Shows station list.

• Local Scan: Start a limited scan of available stations by pressing the

ENTER

button on the front panel or the ENT

(Not available in all markets).

• Full Scan: Start a full range scan of available stations by pressing the

ENTER

button on the front panel or the ENT

• Manual Tune: Press the ENTER

key on the remote control and select stations manually by turning the knob on

the front panel or using the up/down

• DRC, Dynamic Range Control: Select between "High", "Low" and "Off".

Press the ENTER

button on the front panel or the ENT

, then press

. Up to 30 preset

arrow keys or the PRESET

on the front panel

button on the front panel

to toggle to the DAB

key on the remote control.

button on the front panel or the ENT

arrow keys on the remote control.

remote control and turn the knob on the front panel or use the up/down

arrow keys on the remote control to change.

• Station Order: Display station order as either "Alphanumeric", "Ensemble"

or "Valid".

• Prune Station: Select between "Yes" or "No". The Prune setting allows

you to remove stations that are not active or can not be received.

NOTE: Prune will remove unavailable stations from both the Station

List and the DAB Preset List.

• DAB Preset: Displays all 30 of the DAB/DAB+ preset stations and allows

tuning to the selected preset by pressing the ENTER

panel or the ENT

Remote Unit Advanced Buttons

Setup menu

To enter the setup menu, press the SETUP

key on the

and you will see the following display:

> Dimmer

Version

• Dimmer: Controls the brightness of the front panel display, it can be

dimmed with seven steps. Press the LEFT or RIGHT arrow keys on the remote

control to change the display brightness.

NOTE: This setting is stored permanently even after the RT-11 is

powered off.

To temporarily change the display brightness, press the DIM

the remote control.

• Version: Shows the software version loaded in the unit.

• Factory Default: Sets the unit into the original state as when it left the

factory. Presets will be lost.

• Exit: Exits the setup menu.

QUEUE Button