Settings; Change Settings; Offset; Zero The Pressure Range - PCE Instruments PCE-HVAC 4 Manual De Instrucciones

5.3

Settings

Use the settings menu to change the settings for the offset, sleep mode or Bluetooth mode. The
pressure gauge will save your settings to the internal memory.
Option

Offset

Bluetooth

Sleep mode
When the device is in the settings menu, the display will show "SETUP". Hold the "Setup" key
for three seconds to enter or leave settings mode.
5.3.1

Change settings

Use the "Units ▲" or "Units▼" keys to navigate to the setting that needs to be
-
changed.
Press "Enter" to choose the corresponding setup option.
-
Press "Units ▲" or "Units▼" to select the desired setting.
-
Press "Enter" to save your changes.
-
5.3.2 Offset
The primary display shows the temperature in correlation with the offset. You can save
individual offsets for T1 and T2.
5.3.3

Zero the pressure range

To ensure accurate readings, zero the pressure range before each measurement. Make sure
that the meter and / or the pressure hoses are open and not connected to any source of
pressure. Press and hold the "Hold" key for three seconds and the instrument will set the
environmental pressure as the zero point.
5.3.4

Automatic shutdown

If sleep mode is activated, the pressure gauge will shut down after 30 minutes of inactivity. In
order to activate or deactivate sleep mode, you need to go into the settings menu and then
press the "Units ▲" and "Units▼" key to go to the submenu "SLP". Then press "Enter" and you
will be able to choose between "On" and "Off". Press "Enter" to save your changes.
5.3.5 Bluetooth
The Bluetooth module can be connected with MFi (Made for iPod 7 iPhone / iPad Logo)
equipment and Bluetooth standard SPP equipment and send the measured data to Android and
Apple iOS devices via Bluetooth. It transfers data with a 2.4 GHz ISM band and it is compatible
with the Bluetooth core specifications version 3.0 +EDR.
The Bluetooth function can be activated or deactivated as described in chapter ¡Error! No se
encuentra el origen de la referencia..
Menu item
Offset
bt
SLP
© PCE Instruments
Settings
T1 or T2
On (Bluetooth activated)
Off (Bluetooth deactivated)
On (sleep mode activated)
Off (sleep mode deactivated)