Publicidad
Idiomas disponibles
Idiomas disponibles
6. TROUBLESHOOTING
EN
Problem
The appliance does not start.
The appliance does not dry the
air as it should.
The appliance makes a loud
noise when operating.
Frost appears on the coils.
Water on floor.
The
LED (auto defrosting
LED) flashes.
Solution
■
Make sure the mains plug is properly connected to the
mains.
■
Check the house fuse/circuit breaker box.
■
The appliance reaches the preset humidity level, or the
tank is full.
■
The tank is not placed in the proper position.
■
Enough time is needed to remove the moisture.
■
Make sure there are no curtains, blinds or furniture
blocking the front or back of the appliance.
■
The humidity level is set low.
■
Check that all doors, windows and other openings are
securely closed.
■
Room temperature is too low, below 5°C (41°F).
■
There is a kerosene heater or something giving off water
vapour in the room.
■
The air filter is clogged.
■
The appliance is tilted instead of being upright as it
should be.
■
The floor surface is not level.
■
This is normal. The appliance has auto defrosting
feature to remove frost buildup.
■
The drainage tube connection is loose.
■
The drainage opening cover is not replaced while using
the tank to collect water.
■
The room temperature sensor error, or evaporator
temperature sensor error. Unplug the appliance and
check for any obstruction, then re-plug the appliance. If
the error still repeats, call your retailer for service.
23
Publicidad
