Driver Installation - EUROCOM m189 Manual Del Usuario

Concise User's Guide
8. As the computer starts up, press a key when you see the message "Press any key to boot from CD or DVD".
9. The system software will prompt you through the installation procedure (see the Microsoft Windows Vista OS
documentation for more details).
10.Install the drivers as per the instructions in
order indicated in Table 5, on page
11. Insert the Device Drivers & Utilities + User's Manual DVD-ROM into the CD/DVD drive.
12.Click Optional (button).
13.Click 6.Install Robson Driver > Yes.
14.Click Next > Yes > Next > Next.
15.Click Finish to restart the computer.
16.After restarting the computer click Restart Now to complete the installation procedure after the computer has made
the necessary hardware changes.
Phoenix TrustedCore(tm) Setup Utility
Main Advanced Advanced Security
Advanced Chipset Control
Reset Configuration Data: [No]
Local Bus IDE adapter: [Both]
Boot-time Diagnostic Screen: [Enabled]
Legacy USB Support: [Enabled]
USB 2.0 Enable: [Enabled]
POST Beep Sound [Disabled]
Battery Low Alarm Beep: [Disabled]
F1 Help Select Item -/+
Esc Exit Select Menu Enter
Figure 14 - BIOS Advanced & Advanced Chipset Control Menus
34 - Intel Turbo Memory Module
"Driver Installation" on page 21
21).
Boot Exit
Item Specific Help
Select options for
Advanced Chipset
features.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
(make sure the drivers are installed in the
Phoenix TrustedCore(tm) Setup Utility
Advanced
Advanced Chipset Control
Intel Robson [Enabled]
SATA - Device 31, Function 2: [Enhanced]
AHCI Configuration Enabled]
DFOROM(Robson) Support: [Enabled]
F1 Help Select Item -/+
Esc Exit Select Menu Enter
Item Specific Help
Intel Turbo Memory
Technology
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit