[ENG] Instruction manual
DAB SETTING (P´9122, P´9123, P´9124 only)
DAB Setting menu options [32.1]:
You can select from the following options. Note that the DAB
scanning options can only be selected when the set is in DAB
mode.
QUICK SCAN: the set scans the DAB channels most com-
monly used for broadcasts. This takes about 45 seconds. You
should fully extend the telescopic antenna before selecting this
option.
FULL SCAN: the set scans all the DAB channels, including L
Band.
AUTO CLOCK: When AUTO CLOCK ON is on, the set will set
the internal clock automatically from the DAB transmission.
−
33
34
There may be some regions where the DAB transmission
clock is not correct. In these areas, you should select
AUTO CLOCK OFF, and set the clock manually.
AUTO ENTER: When AUTO ENTER ON is selected, the set
will tune to the displayed DAB station automatically after 3
seconds. When AUTO ENTER OFF is selected, you have
to press the ENTER button on the set or remote to select
the station.
MANUAL TUNE: You can use this to manually select a DAB
channel and the stations available. After selecting MANUAL
TUNE, use the tuning controls or the UP/DOWN buttons to
select the required channel, and press ENTER [32.2]. The
set will search for a DAB signal on the selected channel.
If a signal is not found the set will return to the last station
tuned. If a DAB signal is found, the set will display the