Line-Array Assembly And Wiring - dBTechnologies VIO L212 Manual Del Usuario

LINE-ARRAY ASSEMBLY AND WIRING

• Remove the safety strap and the top. At the rear of the modules insert the pins for the fastening of the angles
calculated by the software.
• By means of motors, lift 1 fly-bar from the DT-DRK212 dolly and secure it in flown configuration to the upper
VIO-L212 top.
• For the following connection make sure to route the necessary main wirings on the fly-bar.
• Connect the first individual modules, especially the re-linkable ones.
• Lift the upper part of the line-array
VIO-L212
46
English
Code 420120270 REV. 1.0