Publicidad
Energy display/ Energy-Anzeige/ Affichage Energy/ Pantalla energía/ Visualizzazione Energy
The Energy display shows how much power the connected device consumes. By pressing the "ENERGY" -key again,
further parameters can be read:
W: wattage
V: voltage
Hz: frequency
A: amperage
Power Factor
MAX: maximum wattage
MMIN: minimum wattage
ENERGY OVERLOAD: maximum overload limit
Note:
The overload limit can be set individually. Press the "ENERGY" button for approx. 3s and release it afterwards. The
value in the Energy display will then flash. Use the "SET" button and the "UP" button to set the desired value. Please
note that the value must not exceed the maximum overload limit of 3.680W! If you want to cancel the setting, press the
"OK" button. If the connected device exceeds the "overload limit" you set, the message "OVERLOAD" flashes.
Caution:
If the connected device exceeds the maximum overload limit of 3.680W, remove this device immediately from
the energy meter! Because there is a risk of overheating!
Die Energie-Anzeige stellt dar, wieviel Energie das angeschlossene Gerät verbraucht. Durch wiederholtes Drücken der
-Taste lassen sich weitere Parameter ablesen:
W: Leistung
V: Spannung
Hz: Frequenz
A: Stromstärke
Power Factor = Leistungsfaktor
SEBSON - Sebastian Sonntag - Gernotstr.17 - 44319 Dortmund Germany - www.sebson.de
11
Publicidad
