General Safety Rules - Festool CMS-PS 200 Manual De Instrucciones

Technical data
Saw blade, maximum permissible length of
teeth:
Wood
Aluminium, steel
Weight
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Scope of delivery
- Retaining panel for jig saw (1.1)
Graphical symbols
Caution. Danger!
Read the operating instructions/notes
1 Intended use
The following jig saws can be fitted to the retain-
ing panel (1.1):
- PS 200 E
- PS 2 E
- PS 2
- PS 300 Q
- PS 300 EQ
- PSB 300 Q
- PSB 300 EQ
- PS 400 EBQ
- PS 420 EBQ
- PSB 400 EBQ
- PSB 420 EBQ
The installation of other compass saws is
not possible and therefore not permitted.
Fitting one of the abovementioned jig saws to
the retaining panel and installing it in the CMS-
GE/Basis Plus forms a mobile benchsaw. These
machines are intended to be used for sawing
woodand wood-like materials. With the special
saw blades offered by Festool, also plastics,
steels, aluminium, nonferrous metals and cera-
mic tilescan be cut. documents for the individual
materials.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1

General Safety Rules

WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/
or serious injury.
CMS-PS 200/PS 300
105 mm
60 mm
3.3 kg
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
- Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments or changing
accessories. Accidental starting of the power
tool is a cause of some accidents.
- Properly assemble the working stand before
mounting the tool. Proper assembly is impor-
tant to prevent risk of collapse.
- Securely fasten the power tool to the working
stand before use. Power tool shifting on the
working stand can cause loss of control.
- Place the working stand on a solid, flat and
level surface. When the working stand can shift
or rock, the power tool or workpiece cannot be
steadily and safely controlled.
- Do not overload the working stand or use as
ladder or scaffolding. Overloading or standing
on the working stand causes the stand to be
"top-heavy" and likely to tip over.
- Prior to initial operation, the jig saw blade must
be checked for secure seating and smooth run-
ning.
- Always use a push stick when making longitu-
dinal cuts in workpieces that are narrower than
120 mm.
- Secure round timber on either side of the saw
blade to prevent it from turning.
- Never work with a damaged jig saw.
- Avoid overloading the jig saw.
- Before transporting the machine, remove the
jig saw blade.
- Wear suitable protection such as ear protection,
safety goggles, a dust mask for work which
generates dust, and protective gloves when
working with raw materials and when changing
tools.
3 Fitting
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
9