Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed. Incorrect operation due to ignoring of instructions may cause harm or
damage. The seriousness is classified by the following indications.
WARNING
!
!
CAUTION
Meanings of symbols used in this manual are as shown below.
!
Plug in power plug
! !
properly.
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
Do not modify power cord
! !
length or share the outlet
with other appliances.
It may cause electric shock or
fire due to heat generation.
Always ensure effective
! !
! !
earthing.
Incorrect earthing may cause
electric shock.
Unplug the unit if strange
! !
sounds, smell, or smoke
comes from it.
It may cause fire and electric
shock.
Keep firearms away.
! !
It may cause fire.
Ventilate room before operating air
! !
conditioner if there is a gas leakage from
another appliance.
It may cause explosion, fire and, burns.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Never do this.
Always do this.
!
WARNING
Do not operate or stop the
unit by inserting or pulling
out the power plug.
It may cause electric shock or fire
due to heat generation.
Do not operate with wet
hands or in damp
environment.
It may cause electric shock.
Do not allow water to run
into electric parts.
It may cause failure of machine
or electric shock.
Do not use the socket if it is
loose or damaged.
It may cause fire and electric
shock.
Do not use the power cord
close to heating appliances.
It may cause fire and electric
shock.
2
Do not damage or use an
unspecified power cord.
It may cause electric shock or fire.
If the power cord is damaged, it
must be replaced by the manufac-
turer or an authorised service
centre or a similarly qualified per-
son in order to avoid a hazard.
Do not direct airflow at
room occupants only.
This could damage your health.
! ! ! !
Always install circuit
breaker and a dedicated
power circuit.
Incorrect installation may cause
fire and electric shock.
Do not open the unit
during operation.
It may cause electric shock.
Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.
It may cause an explosion or fire.
Do not disassemble or modify unit.
It may cause failure and electric shock.