Hkoenig KOL7812 Manual De Usuario página 16

unit must be≦30
2) Keep unit running in fan mode for half day to dry inside of
unit completely to prevent from going moldy.
3) Turn off the unit, pull out plug then wrap the power cord
around the wire-winding pillar, insert the plug into the
universal fixing hole at the back panel of the unit, install
the water stopper and drain cover.
4) Remove the heat exhaust hose assembly, clean and keep
it properly.
Notes:
l Hold the exhaust hose assembly with both hands when
removal.
l Push the fasteners aside on exhaust air outlet using your
thumbs, then pull out exhaust hose assembly.
5) Pack the air-conditioner properly with soft plastic bag and
put it in dry place with appropriate dust-proof measures,
and keep the unit away from children.
6) Take out the batteries from the remote control and keep it
properly.
Note:
Assure the unit is stored in a dry place. All accessories of
the unit shall be protected together properly.
).