Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3 Menu and programming the amplifier
The programming of the amplifier is through the integrate programmer. Below the steps and the menu options are
explained:
When you connect the headend to the mains or exit of sleep mode, the LCD display shows
an initial screen showing the model and software version of the amplifier.
If no key is pressed for 60 seconds, the amplifier enter in sleep mode. To exit the sleep
mode and access the programming press any key on the keypad.
3.1 Main menu
Press the OK key to open the main menu. If the headens has a PIN code previously set, a
screen will appear asking to enter it.
Select the digits values with
The main menu contains the following options:
-
CONFIG: Selecting this menu is possible change the general settings of the amplifier.
-
FM: Allow change the settings of the amplifier for the FM band.
-
BIII: Set the options of the amplifier for the BIII/ DAB band.
-
UHF: To set the UHF filters channels configuration, gain and voltages in all UHF inputs.
-
SAT: Allows change the parameters of amplifier for IF satellite band (only available for Nebula 8S)
Move through options and menus with keys
OK to confirm and ESC to go back.
Press MENU at any time to go back to the initial screen.
In order to enter to programming the headend, you must have the AGC (Automatic Gain Control)
function turned OFF.
3.2 CONFIG menu
Within this submenu are these options:
-
Temperature: It shows the internal temperature of the Nebula.
-
Supp: It shows the status of the amplifier's feeding.
-
Import: Imports the configuration from a USB device. *
-
Export: Export settings to a USB device. *
-
Defaults: Loads the factory settings.
-
LTE: Configure the LTE filter in the UHF band
-
Lang.: Selects the language of the texts on the LCD display.
-
PIN: Enables or disables the amplifier password.
* This option only appears if a USB memory stick is connected to the USB PORT connector.
Reserved for technical modifications and/or errors
User's manual · Nebula
keys. Press OK button to confirm the values.
-
of the keyboard.
10
-
Nebula8S
17a17 ß
... = ...
PIN:
----
Nebula
Version en_1.2
FTE maximal
Publicidad
Capítulos
Tabla de contenido
