Setting The Clock And Timer; To Set The Time Of Day; To Set The Timer - Fulgor Milano F6SP301 Serie Manual De Uso Y Cuidado

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the
clock displays the time 12:00
The clock time will appear during all oven operations except when there is the timer or any timed cooking
operations running.
The oven is preset to a 12-hour clock and indicates

To Set the Time of Day

1. Touch [TIME] until the display shows the "SET
TIME" writing.
2. Touch [INC] or [DEC] to set the desired time, the
hours will begin flashing: continue until the correct
AM
hour value and or
3. Touch [TIME] again to confirm the hour and minutes
will start flashing.
4. Touch [INC] or [DEC] to set the desired minutes
value or hold the key to change by 10 minute steps.
5. Touch [TIME] again or wait for 5 seconds in order to
confirm the time.
NOTE: The Time of Day can never be set if any time
function is already set: first delete all the active time
functions.

Setting the Clock and Timer

AM
.
PM
indication is selected.
AM PM
and .

To Set the Timer

1. Touch [TIME] until the display shows the
"TIMER" writing.
2. Touch [INC] or [DEC] to set the desired timer
value, the hours will begin flashing: continue until
the desired value is set.
3. Touch [TIME] again to confirm the hour and
minutes will start flashing.
4. Touch [INC] or [DEC] to set the desired minutes
value or hold the key to change by 10 minute
steps.
5. Touch [TIME] again or wait for 5 seconds in order
to confirm the time.
6. "TIMER" will be steadily displayed.
7. When the time ends, reminder beeps will sound
for 15 minutes or until the [TIME] key is pressed.
8. Timer format is usually HR:MIN, switching into
MIN:SEC during the last minute.
9. The displayed value is always rounded to the
lower minute.
Use & Care Manual
ENGLISH
13