Publicidad
Idiomas disponibles
Idiomas disponibles
User manual
Instructions for optical connection.
For the optical connection, a mono-mode optical fibre with SC/APC type connector will be used.
Remove the protective cover from the optical connector located inside the equipment, as well as the hood for the single-fibre cable's con-
nector.
Connect the cable to the equipment taking care when aligning the guide pins of both connectors, pressing the connector all the way.
Connection precautions.
Take extreme care when handling the unprotected connector points since small scratches, marks, impurities and/or dirt particles, oil, gre-
ase, sweat, etc., can significantly degrade the signal.
To clean the connector tips, rub gently (without applying pressure) with a lint-free lens cleaning swab moistened with additive-free isopropyl
alcohol. Before connecting, allow the alcohol to dry thoroughly.
Store connector covers and cable hoods for future removal/protection procedures.
Always place the protective covers on the connectors of equipment that is not connected to cables in order to avoid any chance of the laser
beam damaging eyes.
Where possible, avoid switching on the transmitter without it being connected to the fibre.
Safety Precautions.
Warning.-
This product emits an invisible laser beam.
Avoid exposure to laser radiation. The use of vi-
sual instruments (e.g. binoculars, magnifying
glasses, etc.) can increase the risk of damage to
eyes.
INVISIBLE LASER RADIATION
Avoid Exposure to Beam
Class 1M Laser Product
Wavelength 1270 - 1350 nm
Peak Output Power 75 mW
Conforms to EN60825-1: 2007
Precaution.–
- The use of controls or adjustments, as well as different procedures be-
yond those specified in this manual could result in exposure to harmful ra-
diation.
- Read and follow the instructions in this manual very carefully, keep this
manual for future reference.
- Do not use the equipment in a way that does not conform to these opera-
ting instructions or under any condition that exceeds the indicated envi-
ronmental specifications.
- The user cannot service this equipment. For technical assistance, contact
our technical assistance department.
- The laser beam should not be pointed at people and/or animals.
10
F.O. Receiver Ret. Outdoor
Publicidad
