Trouble Shoot - Business Source 39039 Manual Del Usuario

TROUBLE SHOOTING
Question 1 : Why is projector blue indicator on, the projection screen has
Answer : Make sure not to press and hold the power key too long. Release
not yet come out?
the power key as soon as the blue indicator is on. Please be
patient and not to push the power key repeatedly during the
projector system is booting. Otherwise that may cause the
projector stuck.
Question 2 : When the projector is in use, it abruptly quits the playback
Answer : Normally the projector will be back to system home page or
screen.
stop working easily if the blue touch buttons are touched
during playback.
Answer : Please check:
Question 3 : The projector's remote control isn't functioning.
1. If the status light on the remote �lashes each time your press
2. Try moving closer to the projector with the remote.
3. Check that the batteries are functioning and inserted properly.
Answer : In this case there are several possibilities.
Question 4 : Why can some movies not be played?
1. The �ile size is too large.
2. The video resolution is higher than 1080p. The supported
3. The �ile format is not supported. Please refer to the the video
Answer : Due to the copyright issue of Dolby, this projector does not
Question 5 : Why does playing move have no sound coming out?
support Dolby audio decoding. You might not get sound from
videos if they use Dolby audio decoding.
Answer : In this case there are several possibilities that will cause the
Question 6 : How should I do if the projector system is crashed or stuck?
system crash sometimes.
1. The computing power of the projector cannot catch up the
2. The mismatched display resolutions between the projector
a button on the remote, the problem is not with your remote.
resolution is only up to 1080p.
format support list in Speci�ications chapter.
one of the connected devices.
and the connected device. The possible solution is to restart
the projector. Then the projector will work normally.