Tabla de contenido
Publicidad
M.-Nr. 11313351
Quantity Mat. no.
Designation
4
8.4 washer
4
8 x 65 wood screw
8
15 x 44 x 3 washer
8
Spacer
2
Clamping plate
4
CEM 6 x 12 raised-head screw
2
M6 x 20 bolt
1
Front panel (closed stand only)
2
Side panel (closed stand only)
12
M4 x 25 raised-head screw (closed stand only)
Danger due to incorrectly carried out service and repair work
WARNING
Danger due to incorrectly carried out service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is
carried out incorrectly.
Service and repair work should only be carried out by a suitably qualified electrician
A
with specialist training, knowledge and experience.
All appropriate safety regulations must be taken into account.
A
Read the technical service documentation (TSD) before starting service work.
A
Measures to be carried out before starting any service work
– Carry out appropriate electrical safety checks.
– Disconnect all machine utility connections in accordance with the operating
instructions.
Measures to be carried out after service work has been completed
– Carry out appropriate electrical safety checks.
– Check the appliance for correct operation.
Risk of cuts
WARNING
Components are sharp.
Risk of cuts during service work.
Wear protective gloves.
A
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
11 von 25
20.01.2020
Publicidad
Tabla de contenido
