Tws Function; How To Charge - Axess SPBT1053 Manual De Usuario

AUX-IN
• For other compatible music devices or your MP3/MP4 players, use the supplied
audio line cable to connect from the device's "Line Out" to the "Aux In" of this
device to Enjoy playing music.
• Under any playing mode, when you use the audio cable to connect the device,
it will auto switch to the AUX mode.
• Under AUX mode, all functions can be controlled by external device.
FM RADIO
• Turn the power button to "ON", press the "MODE" button, the speaker will prompt
"The Radio Mode" when entering FM state.
• Under playing mode, short press "Play/Pause" button to auto search the
FM Channel and store it automatically.
• Press Forward or Backward button to change the stored FM channel.

TWS FUNCTION

• Turn on two identical speakers you want to pair, both under BT mode. Only need
to set up one of the two units.
• Long press "PLAY/PAUSE" button, speaker will make a chiming tone to start
pairing, and make the chime again 3 times once it's successfully paired.
• Make Bluetooth connection with your mobile phone to play music by the two
paired Speakers to create more powerful surround sound effect.
• When you want to exit the TWS mode, long press "PLAY/PAUSE" button again
to exit the TWS function.
• Once two units paired with TWS, when they both are turned on next time within
effective range, they can be automatically paired again.
Remark: Under Bluetooth TWS mode, if you connect your mobile phone to the
unit (you long pressed "Play/Pause" button at beginning) via an audio cable,
it will start to play AUX via TWS function.
REMARKS
• To turn the unit on/off, please long press the Power button.
• When the speaker Bluetooth connected with one mobile device, user can
long press the Mode button to disconnect the previous device, then make
Bluetooth connection with another mobile device.
• Default volume is at 50% status of max volume.
• When battery voltage low, the speaker will prompt
"Battery Is Low, Please Recharge In Time".
• Turn the power button to "off" while unit is not in use.

HOW TO CHARGE

• The charger is not included in the accessories. Please use a standard
5V/1~2A charger to charge this device, and we are not responsible for any
damage caused by using other charger.
• Power off the unit, put the provided charge cable into the charge slot of unit,
connect the other end to PC or other charger with 5V output.
• Charge time should be 2-4 hours. The light is red while charging, and the
indicator light will switch off when full charged.
• In order to prolong the life of battery, please do not charge more than 8 hours.
IMPORTANT:
When playing music during charging, please put the volume to mid-level sound,
because for some music with heavy bass, the charger may not be able to afford
the high current temporarily under the maximum volume.
NOTE
When speaker is not in use please turn off the device to conserve battery life. Make
sure to turn down the volume when you turn off the device so you can maintain the
speakers' (sub)woofer in good condition. This way you are less like to burn out or
damage the device.